(New Version) Quality PassLeader Microsoft 70-415 Practice Tests With 100 Precent Real Exam Questions (1-20)

ATTENTION: PassLeader now is offering the latest and 100 percent pass 70-415 exam braindumps, we ensure the 70-415 exam questions are the newest, and you can pass 70-415 exam easily and quickly. Visit the site passleader.com and get the free exam vce and pdf dumps and FREE VCE PLAYER!

QUESTION 1
Your network contains an Active Directory domain named contoso.com. The domain contains an internal network and a perimeter network. The perimeter network contains a server named Gateway1 that has the Remote Desktop Gateway role service installed. From the Internet, all of the domain users can access several Remote Desktop Session Host (RD Session Host) servers on the internal network by using Remote Desktop Gateway (RD Gateway) on Gateway1. Currently, the users cannot access their internal desktop computer from the Internet by using RD Gateway on Gateway1. On the internal network, a user named User1 has a client computer named Computer1 that runs Windows 8. You enable Remote Desktop on Computer1. You need to ensure that User1 can access Computer1 from the Internet by using a Remote Desktop connection. What should you configure?

A.    The Windows Firewall with Advanced Security settings on Gateway1
B.    The Windows Firewall with Advanced Security settings on Computer1
C.    The Remote Desktop connection authorization policies {RD CAPs) on Gateway1
D.    The Remote Desktop resource authorization policies (RD RAPs) on Gateway1

Answer: D
Explanation:
The users can access to the Remote Desktop Session Host (RD Session Host) servers on the internal network by using Remote Desktop Gateway, but, they can’t access to particular computer.
RD RAPs
RD RAPs allow you to specify the internal network resources that remote users can connect to through an RD Gateway server. When you create an RD RAP, you can create a computer group (a list of computers on the internal network to which you want the remote users to connect) and associate it with the RD RAP. Remote users connecting to an internal network through an RD Gateway server are granted access to computers on the network if they meet the conditions specified in at least one RD CAP and one RD RAP. Understanding Authorization Policies for Remote Desktop Gateway.

QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains servers that run Windows Server 2012. You plan to deploy a Remote Desktop Virtualization Host (RD Virtualization Host) that will contain five virtual desktops. The requirement of each virtual desktop is shown in the following table.

You need to identify which virtual desktop or virtual desktops require a virtual SCSI controller. Which virtual desktop or desktops should you identify? (Each correct answer presents part of the solution. Choose all that apply.)

A.    VD1
B.    VD2
C.    VD3
D.    VD4
E.    VD5

Answer: AD

QUESTION 3
You have a server named Server1. You open Server Manager on Server1 as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can publish RemoteApp programs. What should you do?

A.    Create a Remote Desktop connection authorization policy (RD CAP).
B.    Install the Remote Desktop Gateway role service.
C.    Create a collection.
D.    Install the Remote Desktop Virtualization Host role service.

Answer: C
Explanation:
A: RD CAP isn’t right as this isn’t a RD Gateway scenario B RD Gateway doesn’t appear to be in play her
C: RemoteApp programs are published to either a session collection or virtual desktop collection using Server Manager.
D: RD Virtual Host implies we are using a VDI pool and that doesn’t appear to be the case with a RemoteApp.
Test Lab Guide: Remote Desktop Services Publishing
http://technet.microsoft.com/en-us/library/hh831442.aspx http://class10e.com/Microsoft/you-need-to-ensure-that-you-can-publish-remoteapp-programs/

QUESTION 4
Your network contains an Active Directory domain named contoso.com. The domain has Remote Desktop Services (RDS) deployed. The domain contains six servers. The servers are configured as shown in the following table.

You plan to configure Server6 as an additional RD Connection Broker in the RDS deployment. You need to identify which servers require the SQL Server Native Client installed. Which servers should you identify? (Each correct answer presents part of the solution. Choose all that apply.)

A.    Server1
B.    Server2
C.    Server3
D.    Server4
E.    Server5
F.    Server6

Answer: CF
Explanation:
You must have a SQL Server setup that can be used by the RD Connection Broker servers to store data. At least SQL Server 2008 R2 must be used, and the minimum recommended SQL Server SKU for this is Standard with at least 4GB of RAM. RD Connection Broker High Availability in Windows Server 2012

QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain has Remote Desktop Services (RDS) deployed. The domain contains two servers named Server1 and Server2 that have the Remote Desktop Web Access role service installed. The RD Web Access sites are accessible by using the URL https://rdp.contoso.com/rdweb. You connect to https://rdp.contoso.com/rdweb and you receive the error message shown in the exhibit. (Click the Exhibit button.)

You need to prevent the error message from appearing when users connect to the RD Web Access sites. You obtain a server certificate for rdp.contoso.com from a trusted certification authority (CA). What should you do next? More than one answer choice may achieve the goal. Select the BEST answer.

A.    On Server1 and Server2, open the Certificates console and import the server certificate to the Trusted Publishers store.
B.    On Server1 and Server2, open the Certificates console and import the server certificate to the Remote Desktop certificate store.
C.    From Server Manager, open the properties of the RDS deployment and select the server certificate.
D.    On Server1 and Server2, open Internet Information Services (IIS) Manager and modify the bindings of the Default Web Site.

Answer: C

QUESTION 6
You manage a pooled virtual desktop collection named Collection1. Collection1 is configured to use user profile disks. You need to ensure that when users log off of their virtual desktop, the contents of the Downloads, Music, and Pictures folders are deleted. The contents of the other profile folders must be retained. What should you do?

A.    From a Group Policy object (GPO), modify the Folder Redirection settings.
B.    From the properties of each user account, modify the Remote Desktop Service Profile settings.
C.    From Server Manager, modify the properties of Collection1.
D.    From the properties of each user account, modify the Sessions settings.

Answer: C

QUESTION 7
Hotspot Question
You have a server named Server1 that runs Windows Server 2012. Server1 has the Remote Desktop Virtualization Host role service installed. You plan to create two virtual desktop collections named Collection1 and Collection2. Each collection will support a separate group of users. The requirements of each collection are shown in the following table.

You need to identify the required configuration for each collection. What should you identify? To answer, select the appropriate Collection type and Management type for each collection in the dialog box in the answer area.

Answer:

QUESTION 8
Your network contains an Active Directory domain named contoso.com. The domain contains five servers. The servers are configured as shown in the following table.

You plan to deploy the Virtual Machine Servicing Tool (VMST) 3.0. You need to identify on which server VMST 3.0 must be installed. Which server should you identify?

A.    Server1
B.    Server2
C.    Server3
D.    Server4
E.    Server5

Answer: B
Explanation:
VMST3 must be installed on the same server as the VMM Administrator Console (which provides the Windows PowerShell support).

QUESTION 9
You have a corporate image of Windows 8 named Imagel.wim. You deploy Image1 from a bootable USB flash drive to a client computer named Computer1. You add several applications to Image1 and configure the applications. You need to capture the modified image to the bootable USB flash drive as Image2. The solution must meet the following requirements:
– The amount of disk space required for storage must be minimized.
– The settings of Image1 must be retained.
You start the client computer from a Windows Pre-installation Environment (Windows PE) deployment image. What should you do next? (Each correct answer presents a complete solution. Choose all that apply.)

A.    Run the diskpart select command.
B.    Run the dism.exe command and specify the /append-image parameter.
C.    Run the dism.exe command and specify the /capture-image parameter.
D.    Run the imagex.exe command and specify the /capture parameter.
E.    Run the diskpart attach command.
F.    Run the imagex.exe command and specify the /append parameter.

Answer: BD

QUESTION 10
Your network contains an Active Directory domain named contoso.com. You have a custom image of Windows 8 that contains a Windows Store application named Appl. You need to remove App1 completely from the image. You must achieve the goal by using the minimum amount of administrative effort. What should you do?

A.    Run the dism.exe command and specify the /image parameter and the /Remove-Package parameter.
B.    Run the dism.exe command and specify the /image parameter and the /Remove-ProvisionedAppxPackage parameter.
C.    Run the imagex.exe command and specify the /mountrw parameter and the /delete parameter.
D.    Run the imagex.exe command and specify the /mountrw parameter and the /cleanup parameter.

Answer: B

---

http://www.passleader.com/70-415.html

QUESTION 11
Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Windows Deployment Services server role installed. You have a virtual machine named VM1. VM1 is configured as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can capture an image of VM1 by using Windows Deployment Services (WDS). What should you do?

A.    Add a legacy network adapter to VM1 and a capture image to Server1.
B.    Add an install image and a capture image to Server1.
C.    Add a legacy network adapter to VM1 and a discovery image to Server1.
D.    Add a discovery image and a capture image to Server1.

Answer: A
Explanation:
Add a legacy network adapter to VM1 and a capture image to Server1. Without the exhibit, we can only guess that the VM is configured without a legacy network adapter. PXEis only available on a legacy network adapter in HV.

QUESTION 12
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that have the Windows Deployment Services server role installed. Server1 is located on the same network segment as the client computers. Server2 is a standalone Windows Deployment Services (WDS) server that is used for testing. Server2 is located on a different network segment than the client computers. You add a new image of Windows 8 named TestImage to Server2. You plan to deploy the image to several test client computers. You need to ensure that when the test client computers start, they connect automatically to WDS on Server2. What should you use to start the client computers?

A.    The Windows 8 installation media
B.    PXE
C.    A discover image
D.    A boot image

Answer: C
Explanation:
A discover image is a type of boot image that you can use to install an operating system on a computer that is not capable of network booting using the Pre-Boot Execution Environment (PXE). You may want to use a discover image in the following scenarios:
A client is not PXE-enabled.
A client is on a different subnet and you do not have method of getting PXE to the client (for example, IP helper tables or Dynamic Host Control Protocol (DHCP)).
You have many Windows Deployment Services servers and want to target a specific server. When you boot a computer into a discover image, the Windows Deployment Services client will locate a Windows Deployment Services server, and then you can choose the install image you want to install. You can specify a destination server and the discover image will locate and install the image from the server automatically. You can also configure discover images to target a specific Windows Deployment Services server. This means that if you have multiple servers in your environment, you can create a discover image for each one, and then name them based on the name of the server. Creating Discover Images.

QUESTION 13
Your network contains a server named Server1 that runs Windows Server 2012. You plan to deploy Windows 8 to 200 client computers to meet the following requirements:
– Ten executive users must be able to use an application named Appl. Other users must not be able to use Appl.
– All users must be able to use Microsoft Office 2010 when their client computer is disconnected from the network.
The solution must ensure that the amount of hard disk space used to store the images of Windows 8 is minimized. You need to recommend an image deployment solution that meets the requirements of the planned deployment. Which solution should you recommend?

A.    Deploy an image of Windows 8. Deploy Office 2010 by using Microsoft Application Virtualization (App-V). Deploy App1 by using Group Policy Software Installation.
B.    Deploy an image of Windows 8 that contains Office 2010. Deploy App1 by using Group Policy Software Installation.
C.    Deploy an image of Windows 8 that contains Office 2010. Deploy an image of Windows 8 that contains Office 2010 and Appl.
D.    Deploy an image of Windows 8. Deploy App1 and Office 2010 as RemoteApp programs.

Answer: A

QUESTION 14
You have a server named Server1 that runs Windows Server 2012. You install the Windows Deployment Services server role on Server1. You plan to deploy Windows 8 to client computers by using Windows Deployment Services (WDS). You need to identify which images are required for the planned deployment. The solution must use the minimum amount of images. Which images should you identify? (Each correct answer presents part of the solution. Choose all that apply.)

A.    A boot image
B.    A discover image
C.    An install image
D.    A capture image

Answer: AB
Explanation:
After you have at least one boot and one install image on the server, you can deploy an install image. The question doesn’t state that you need to capture an existing machine, so you can just use the .wim from the install media. The question does not specify whether clients have enabled or disable the PXE, therefore, the PXE is enable in the clients and not necesary a discover image.
http://technet.microsoft.com/en-us/library/jj648426.aspx

QUESTION 15
Your network contains an Active Directory domain named contoso.com. The domain contains a server that runs Windows Server 2012. You have an offline image of Windows 8. You download and extract 10 updates from Microsoft Update. You plan to deploy the updates to the image. You need to identify which updates can be fully installed while the image is offline. What should you do?

A.    On Server1, run dism.exe and specify the /mountrw parameter and the /get-mountedwiminfo parameter.
B.    On Server1, run the Mount-WindowsImage cmdlet, and then run the Get-WindowsImage cmdlet.
C.    On Server1, run the Mount-Windowslmage cmdlet, and then run the Get-WindowsPackage cmdlet.
D.    On Server1, run dism.exe and specify the /mount parameter and the /get-wiminfo parameter.

Answer: C

QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains a Windows Server Update Services (WSUS) server. The domain has Microsoft System Center 2012 Configuration Manager and Microsoft System Center 2012 Virtual Machine Manager (VMM) deployed. Users in the finance department connect to a managed pooled virtual desktop collection. You need to recommend a strategy to apply operating system updates to the virtual desktops used by the finance users. What should you recommend? More than one answer choice may achieve the goal. Select the BEST answer.

A.    Manually update a base image and recreate the collection.
B.    From Configuration Manager, configure software updates.
C.    Configure an intranet Microsoft update service location by using Group Policy.
D.    From VMM, perform Update Remediation.

Answer: A

QUESTION 17
Your network contains an Active Directory domain named contoso.com. The domain contains a Virtual Desktop Infrastructure (VDI). The VDI contains three servers. The servers are configured as shown in the following table.

You need to identify the last 30 users who attempted to connect to a virtual desktop. What should you do?

A.    On Server1, create a Data Collector Set (DCS) by using Performance Monitor.
B.    On Server1, run rdvdiag.exe.
C.    On Server2 and Server3, run rdvdiag.exe.
D.    On Server2 and Server3, create a Data Collector Set (DCS) by using Performance Monitor.

Answer: B

QUESTION 18
Your network contains a managed pooled virtual desktop collection named Collection1. Collection1 contains five virtual desktops named VD1, VD2, VD3, VD4, and VD5. You need to deploy an application named App1 to the virtual machines. App1 must be available as quickly as possible to every user who uses a virtual desktop. What should you do?

A.    Run the Recreate All Virtual Desktops wizard, and then install App1 on the parent virtual machine.
B.    Install App1 on the parent virtual machine, and then run the Recreate All Virtual Desktops wizard.
C.    Run the Recreate All Virtual Desktops wizard, and then install App1 on each virtual desktop.
D.    Install App1 on each virtual desktop, and then run the Recreate All Virtual Desktops wizard.

Answer: B
Explanation:
Hyper-V Virtual Machine (VM) Parent-Child Configuration Using Differencing Disks One way to optimize disk space and reduce the number of times that you have to install and update a released operating system is to create parent child configurations using differencing disks in Hyper-V. For example, if you need to install a test lab that will employ three Windows Server 2008 R2 installations: one configured as a domain controller, another configured as an Exchange Server, and a third configured as a SQL Server, you could use a Parent-Child Differencing disk configuration to save the time of installing and updating the Windows Server 2008 R2 installation for all three of those virtual machines. http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parentchild-configuration-using-differencing-disks.aspx#InstallOS

QUESTION 19
Your network contains a Virtual Desktop Infrastructure (VDI), The VDI contains five Hyper-V hosts. The Hyper-V hosts are in a failover cluster. You need to recommend a solution to distribute automatically the virtual desktops based on the current resource usage of the Hyper-V hosts. What should you include in the recommendation?

A.    Microsoft System Center 2012 virtual Machine Manager (VMM)
B.    Hyper-V Replica Broker
C.    Windows System Resource Manager (WSRM)k
D.    Microsoft System Center 2012 Configuration Manager

Answer: C

QUESTION 20
Your network contains an Active Directory domain named contoso.com. The domain has Microsoft System Center 2012 Configuration Manager deployed. You use Configuration Manager to deploy Windows updates to client computers. Your company has several line-of-business applications deployed. The application developer uses Windows Installer patches (.msp files) to provide the company with application updates. You need to recommend a solution to integrate the deployment of the application updates into the current update infrastructure. What should you include in the recommendation?

A.    Windows Assessment and Deployment Kit (Windows ADK)
B.    Microsoft Deployment Toolkit (MDT)
C.    Microsoft Security Compliance Manager
D.    Microsoft System Center Updates Publisher 2011

Answer: D
Explanation:
System Center Updates Publisher
Updates Publisher 2011 is an application that can be used with System Center Configuration Manager to enable independent software vendors or line-of-business application developers and IT administrators to:
Import software updates from catalogs created by non-Microsoft organizations or created from within the administrator’s organization
Create and modify software update definitions
Create applicability and deployment metadata for software updates Export software update definitions to other Updates Publisher 2011 consoles Publish software updates to a configured update server By using Updates Publisher to define software updates and publish them to the update server, administrators you can begin detecting and deploying published software updates with System Center Configuration Manager to client and server computers in your organization. New in System Center Updates Publisher 2011 An improved user interface that allows better control of managing software updates. A new automatic publication type with which Updates Publisher 2011 can query Configuration Manager to determine whether the selected software update or software update bundle is published with full content or only metadata. A new Software Update Cleanup Wizard that you can use to expire software updates that exist on the update server, but are not in the Updates Publisher 2011 repository. The ability to create Software Update bundles. The ability to define prerequisite updates and superseded updates as part of a software update definition Hyperlink.

---

http://www.passleader.com/70-415.html